Location: Homepage -> Product -> FTTH optic drop cable
Category:* 10A - copper-volume ratio is 10 percent of the soft-Copper Clad Aluminum* 10H - copper-volume ratio is 10 percent of the hard-Copper Clad Aluminum* 15A - copper-volume ratio is 15 percent of the soft-Copper Clad Aluminum* 15H - copper-volume ratio is 15 percent of the soft-Copper Clad AluminumTechnical parameters: Nominal diameter mmDC ResistanceΩ/km(20℃)Tensile strength MpaElongation%CCA-15Copper linesH(min)A(max)H(min)A(max)1.
Core line specificationsConductivity% IACScore diameter(mm)Copper thickness(mm)Fracture loa NⅠⅡⅢGT/1.
Model specifications:ModelNameSpecifications of the(mm)TXRTinning soft copper wire0.
Model and specifications:ModelNameSpecifications Range(mm)Resistivity ρ20Ωmm2/m(max)>2.
* special curved optical fiber, providing greater bandwidth and enhanced network transmission characteristics;* two parallel fiber optic cable, FRP has a good compression performance, can protect the fiber;* Add the single steel wire to strengthen , so that cable has a good tensile properties;* cable structure is simple, light weight, strong practical* unique groove design, easy peeling, convenience for connect, and simplify installation and maintenance;* LSNHP fire-retardant jackets, environmental protection and safety.
* special curved optical fiber, providing greater bandwidth and enhanced network transmission characteristics;* two parallel fiber optic cable, FRP has a good compression performance, can protect the fiber;* cable structure is simple, light weight, strong practical;* unique groove design, easy peeling, convenience for connect, and simplify installation and maintenance;* LSNHP fire-retardant jackets, environmental protection and safety.
GJFJV(GJFJZY) non-metallic enhance components, tight coating, PVC jacket indoor telecommunication fiber cable(non-metallic enhance pieces, tight coating, fire-retardant PE jacket indoor communication fiber cable)The structure of fiber optic cable is single-mode optical fiber Or multi-mode fiber directly coating the high tight fiber material to made the tight coating fiber.
GJFJV (GJFJZY) non-metallic enhance components, tight coating, PVC jacket indoor telecommunication fiber cable(non-metallic enhance pieces, tight coating, fire-retardant PE jacket indoor communication fiber cable) The structure of fiber optic cable is single-mode optical fiber Or multi-mode fiber directly coating the high tight fiber material to made the tight coating fiber.
      20/125μm 62.5/125μm G.652 G.655
Attenuation (+20 ℃) 850nm ≤3.5dB/km ≤3.5dB/km    
1300nm ≤1.5dB/km ≤1.5dB/km    
1310nm     ≤0.45dB/km ≤0.50dB/km
1550nm     ≤0.30dB/km ≤0.50dB/km
Bandwidth (A level) 850nm ≥500 MHz·km ≥200 MHz·km    
1300nm ≥1000 MHz·km ≥600 MHz·km    
Aperture 0.200±0.015NA 0.275±0.015NA    
λcc Fiber cable cut-off vavelengh     ≤1260nm ≤1480nm
Δα(-20℃~+60℃) 1300nm ≤2.5dB/km ≤2.5dB/km    
1550nm      ≤0.10dB/km  ≤0.15dB/km